Prior to the use of this product, make sure to apply the
lacquer solvent with 50%-100% of the content of aluminum paste.
After immersion, the aluminum paste has to be mixed at low
speed into buttery homogenous dispersion. In the state of
mixing, resins, solvents and additives shall be gradually
added to the aluminum paste.
Gaution: Make sure to avoid using such dispersion means as
ball milling, sand milling and high-speed agitation lest the
aluminum flakes should be deformed. The product shall be kept
away from fire source, heating source, water, acid, base,
and oxides.
The lauminum paste shall be kept in a sealing container,
and protected from sunshine and rainwater. Keep in a dry place
(below 35¡æ). Be sure to use the product as soon as possible,
replace the cap immediately after application to avoid the
evaporation of solvents and additives. In case of long storage
period, make sure to check if there is any black coating,
drying or diminished dispersion in the aluminum paste so as
to avoid unnecessary losses suffered by the users.
|
